'분류 전체보기'에 해당되는 글 191건

  1. Firmware Installing and Setting 3
  2. How to assemble (BBB) acrylic housing 2
  3. B-Series PCB
  4. bootmapper client 업데이트
  5. ps2avrGB V1.0 및 ps2avrU V1.7 펌웨어 업데이트 8
  6. ps2avrU V1.7 펌웨어 업데이트 5
  7. MX-mini ps2avr V0.2 기판에 ps2avr-ext 이식하는 방법 3
  8. ps2avrU V1.7 펌웨어 업데이트 4
  9. ps2avrGB V1.0 펌웨어 업데이트
  10. bootmapper site 장애 안내
  11. ps2avrGB V1.0 펌웨어 업데이트 2
  12. ps2avrGB V1.0 펌웨어 업데이트 2
  13. ps2avrGB V1.0 펌웨어 업데이트 6
  14. ps2avrGB V1.0 펌웨어 업데이트 2
  15. B 시리즈 기판에 RGB bar 연결하기
  16. ps2avrU V1.7 펌웨어 업데이트
  17. ps2avrGB V1.0 펌웨어 업데이트
  18. B.pad의 기본 키 맵핑 2
  19. ps2avrU V1.7 펌웨어 업데이트 13
  20. RGB LED 추가 연결 방법

Firmware Installing and Setting


  1. bootMapperClient


1) For Window
 - Download : https://www.dropbox.com/s/3bn9flirkb49ahz/BootMapperClient.zip?dl=0



- Unzipping

  • Download bootMapperClient.zip And unzip.

  • After unzipping, you can see the directory like a picture below.





2) For Mac
- Download : https://www.dropbox.com/s/wselndg19ofby85/BootMapperClient.mac.zip?dl=0





2. Downloading Firmware


- Link : https://github.com/showjean/ps2avrU/releases


  • Download ps2avrGB_firmware_Vx.x.x_YYMMDD.zip

  • When unzipping 4 hex files appear. - ps2avrGB_NKRO.hex : Firmware - keymap_gb_B87(EX).hex : Key map for B.87, B.87 EX, B.mini, B.mini EX - keymap_gb_face_thumb.hex : Key map for B.face, B.thumb - keymap_gb_pad.hex : Key map for B.pad




3. How to upload firmware


  • Supporting both for Window and Mac OS

  • Available only while connected by USB

  • First of all you must upload firmware to enable all the functions properly.(When MCU was attached to the PCB by soldering, bootloader was automatically installed.)


  1. Start bootMapperClient.exe


2) Select “Options > firm up(select hex file)” and select firmware file.









- After automatically starting bootloader, keyboard works again.

- If bootloader doesn’t start again, you have to start in manually. While pressing the key “Left ctlr”(in case of B.pad the key “0”), connect USB cable. Then bootloader will start again.



4. How to set RGB LED

  • Just select “Options > connect”





- When you click “connect”, keyboard switch LEDs will be off.

- When you click "disconnect", keyboard switch LEDs will be on and setting mode will be disconnected.

- Num of LEDs : The amount of RGB LED in PCB

- LED mode selection and color setting : Choose LED mode and set Color.(you can use hexa code to define color you want. ex, FF3300)


- Brightness : Can set the brightness of RGB LED by using slider. The brighter RGB LED, the darker switch LED.






5. How to map keys


1) Select “Key Mapper” tab


2) If it’s the first time to map keys.


2-1) Click the button labeled  "load keymap_part.hex or .json" and load basic Key mapping file included in the firmware.


2-2) Select “upload” button, and then key map will be loaded after bootloader starts.

  • If you choose “reboot after uploading”, automatically it will enable the keyboard. If not, stay in the state of bootloader.

  • If you want to enable the keyboard manually, just select “Options>set keyboard” button


2-3) If you want to change key settings, click “toggle bootmapper” button.


2-4) If you press a key, a red light appear on matrix.


2-5) Just select the key code you want.


2-6) When you change all the keys, select “upload” button to upload settings.



3) When you want to change the settings for only several keys from key-mapped keyboard.


3-1) Select “download” button, so download key-map. After that you will see the col/row data table.


3-2) Start bootMapper by clicking “toggle bootmapper”.


3-3) After pressing a keyboard you want to change, select the col/row and keycode value.


3-4) By selection “toggle bootmapper”, stop bootMapper.







6. Custom Macro

  • You can define maximum 12 Custom Macros.

  • A macro can have up to 42 characters.


1) Start bootMapper Client progrma


2) Select “Custom Macro” tab.





3) You can see the display below

  • Select CstMacX tab(CstMac stands for “Custom Macro”.) and enter Characters you want.

  • You can delete a selected character by pressing “remove” button.

  • You can change order by dragging a character.




4) Select “save macro.hex” to save Macro setting.

  • When you upload this file to keyboard using bootloader.


5) If you want to combine modifier keys as a macro, follow the instructions.(Example shows how to set “Ctrl+c” macro.)

  • Add all the keys you want to use as a macro.





- While LCtrl selected, press the “split” button.(or shift + mouse click)






- You will see the splited LCtrl into down and up.





- Just drag anything to place “C” is in the middle between LCtrl(down) and LCtrl(up).








6) You can set the delay for a macro.

- Selecte the key you want.

- Enter time(min 0.1 sec, max 5 secs)

- Press “apply delay” button








7) Text To Macro

  • The text entered can be translated into a macro


- Enter the text you want to us as a macro in the text box "String Parsing"



  • press “parse string >>” button, and then you can see all the keys splited.




- Available texts

Normal Texts : `1234567890-=qwertyuiop[]\asdfghjkl;'zxcvbnm,./

Shift+Texts : ~!@#$%^&*()_+QWERTYUIOP{}|ASDFGHJKL:"ZXCVBNM<>?





'정보' 카테고리의 다른 글

Infomation on ps2avrU+ps2avrGB  (0) 2015.01.21
Hardware + Quick Macro  (0) 2015.01.20
How to assemble (BBB) acrylic housing  (2) 2015.01.09
B-Series PCB  (0) 2015.01.08
MX-mini ps2avr V0.2 기판에 ps2avr-ext 이식하는 방법  (3) 2014.09.10
New Version : http://blog.winkeyless.kr/207


This document is supposed to explain how to assemble B-series acrylic cases(BBB acrtkuc cases).

Despite poor English explanation, you could follow the instruction easilty through lots of photos.



<Things to be prepared before assembling>


1.  Long nuts (M3 * 7mm)


2. Bolts (M3 * 6mm)


3. Bolts(M3 * 10mm)








4. Bumpons(TP104 3M #5302 or same size. 4ea)


5. Hex wrench driver ( 2mm)









<How to Assemble>



1. A set of case is composed of 7 pieces. (4 are as body and 3 are as feet.)





As you can see in the above picture, we recommend you choose transparent or translucent cases except the first and second one to maximize LED effect.



2. If acrylic cases have the protection films attached to both sides, first of all you should detach them.









3. Now let’s assemble  the upper part.

  • Put 3T and 2T mounting plate together on the PCB.

  • And place key switches  like pictures below.







4. The bottom and feet part.

Attach the biggest foot to back side of the last plate using long nuts and bolts.




  • On the surface of the foot, you can find a small hole which doesn’t do anyting, but just shows the direction not to be confused when you overlap other foot.




- Using 6mm bolts.




  • Attach the rest of feet in  order of size using 12mm bolts.

  • And attach bumpons.









4-1. New style feet

























 



5. Let’s connect the upper part(assembled before at 3) and the bottom part using bolts and nuts like the picture below.





  • On joining them with 6mm bolts, the assembling of case is done.







  • After that, you can see it like pictures below

















[Completed Keyboards]


















'정보' 카테고리의 다른 글

Hardware + Quick Macro  (0) 2015.01.20
Firmware Installing and Setting  (3) 2015.01.12
B-Series PCB  (0) 2015.01.08
MX-mini ps2avr V0.2 기판에 ps2avr-ext 이식하는 방법  (3) 2014.09.10
B 시리즈 기판에 RGB bar 연결하기  (0) 2014.07.23

B-Series PCB




[Photo Keyboard using B.87 PCB]




[Photo: keyboard using B.87 PCB - 2]





[Photo : Keyboard using B.pad PCB]





[Photo : Keyboard using B.face PCB]





[Photo : Keyboard using B.mini PCB]





[Photo : Keyboard using B.87 EX PCB]




One of the most noticible features of B-series PCB is the ability to freely change the color of RGB LED.

Additionally you can set the keyboard functions as you wish by using “bootMapper Client” program for PC.


New firmware “ps2avrGB” is the upgraded version of ps2avrU with the power to control RGB LED.


And also you can customize and order the acrylic case easily.


PCB Specifications


  1. Layout(Common)


  1. winkeyed/winkeyless combo

  2. Supporting Caps Lock 3000/8000

  3. Supporting Masestouch Space Bar

  4. Supporting 1.75 right-shift

  5. ISO/ANSI


2. Layout(B.87 EX)


  1. Can separate TenKey

  2. Able to switch between 2X TenKey and 1X*2 TenKey



3. Supports RGB LED

  • pink/white/green/orange/blue/yellow/red


4. Supports Full LED


5. PCB : 1.6T

6. All the parts placed at the back side of PCB


7. Supporting Mount hole for case and plate


8. Mac OS Compatible



Firmware


  1. ps2avrGB


  1. All the features of ps2avrU

  2. Can control RGB LED

  3. Easy Key Mapping

  4. Can register macro



    2. ps2avrU


  1. Interface : USB /PS2 combo

  2. NKRO & 6KRO Support

  3. Supporting key map for 4-layer.

  4. Supporting all the multimedia keys.

  5. Supporting all special keys

  6. Supporting macro and key mapping

  7. Mac OS Compatible



Size


  1. B.87

- Tenkeyless size


2. B.87 EX

- Full Size


3. B.pad

- TenKey size


4. B.face

- 60% of Poker size

- Compatible with poker-x PCB


5. B.thumb

- 60% of Poker size

- micro USB connector

- PCB Thickness : 1.0T


6. B.mini

- MX-mini size


7. B.mini EX

- MX-mini size + tenkey



* You can buy RGB LED and parts in Controller(sub MCU) by selecting options.

* PCB and parts are delivered not soldered. If you want them soldered, please select soldering option.




RGB bar

- Can add RGB Effect of the back side of the keyboard

- Delivered in one-line, not separated as you order.

- White.

- Recommended Length according to PCB

B.87 EX : 12

B.87 : 10

B.mini EX : 11

B.mini : 9 (PCB has 8, but 9 is better due to different space)

B.face : 8

B.thumb : 8

B.pad : 2








bootmapper client 업데이트

bootmapper client를 V0.4.4로 업데이트 했습니다.

기존의 사용자들은 core 파일만 다운로드 하여 기존 폴더에 덮어 씌우면 됩니다.


추가된 기능은 아래와 같습니다.


- 텍스트를 매크로로 변환하는 기능을 추가

: 예를 들어 "abcdEFG"는 텍스트를 타이핑하고 "parse string >>" 버튼을 누르면 매크로에 적용 됩니다.

: 더 자세한 설명 : http://blog.winkeyless.kr/125


- 해상도가 작은 모니터에서 이용 시 화면을 스크롤 할 수 있도록 수정



다운로드 : http://blog.winkeyless.kr/155

사용 법 : http://blog.winkeyless.kr/154

'자료실 > Bootmapper Client' 카테고리의 다른 글

Bootmapper Client 업데이트  (0) 2016.02.12
Bootmapper Client 업데이트  (2) 2015.10.30
Bootmapper Client 업데이트  (4) 2015.10.01
bootmapper client 업데이트  (0) 2015.08.01
Bootmapper Client download  (5) 2014.06.23

펌웨어 링크 : http://blog.winkeyless.kr/17


2014.9.26.


듀얼액션 작동 방식 변경

: 누르면 기본적으로 조합키가 눌려진 상태가 되던 것을, 약 0.5초간 딜레이를 준다.

: 그렇기 때문에, 누른 상태로 잠시 있어야 조합키가 작동된다.

: 다른 키와 조합하면 딜레이와 관계없이 조합키로 작동된다.

: 단독 키(한/영 등)로 사용하려면 눌렀다 떼는 행동을 약0.5초 안에 해야 된다.

= 예를 들어 "R alt + 한/영 "키를 이용시 한/영 을 사용하고 싶다면 0.5초 내에 다운/업을 해야 하고, 

R alt를 누르고 싶다면 0.5초 동안 누르고 있거나, 다른 키들과 조합을 하면 된다.



* ps2avrGB 펌웨어도 함께 업데이트 됩니다.

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153

펌웨어 링크 : http://blog.winkeyless.kr/17


2014.9.14.


- fn2/3 led 설정 시 간혹 n/l LED가 꺼지는 현상 수정



* ps2avrGB 펌웨어도 함께 업데이트 됩니다.

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153

요청하신 분이 계셔서 작성해봅니다.



아래 사진의 각 확대 화면에 그려진대로 와이어를 납땜해주면 됩니다.


다만, 2가지 주의 할 점이 있는데요,


첫 번째는 2번 부분처럼 ps2avr-ext를 기판에 겹체 놓을 때 두 기판 간에 쇼트가 나지 않도록 사이에 절연을 잘 해줘야 한다는 것 입니다. 그렇지 않으면 최악의 경우 회로 사망에 이를 수 있으니 반드시 주의하셔야 합니다.


두 번째는 3번 부분의 빨간 표시 부분인데요, 기판을 잘 보면 녹색 선과 같은 동박 패턴이 있습니다. 이 두 선을 빨간 표시처럼 커팅해서 통전을 막아야 합니다. 그리고, 와이어링을 MCU의 핀에 해줘야 하므로 정밀하게 잘 해줘야 합니다. 옆의 다리들과 쇼트가 나지 않도록 주의하세요.


그럼 참고가 되시길 ^^






< 작업 예 > 

 ISP 로더를 사용할 수 있도록 VCC와 GND는 다른 곳에 와이어링을 해줬습니다.

(사진의 하단에 표시 안 된 와이어는 스크롤 락 LED를 별도로 표시하기 위해서 와이어링 한 것 입니다.)









'정보' 카테고리의 다른 글

How to assemble (BBB) acrylic housing  (2) 2015.01.09
B-Series PCB  (0) 2015.01.08
B 시리즈 기판에 RGB bar 연결하기  (0) 2014.07.23
B.pad의 기본 키 맵핑  (2) 2014.07.03
RGB LED 추가 연결 방법  (0) 2014.06.27

펌웨어 링크 : http://blog.winkeyless.kr/17


2014.9.1.


- 부트매퍼 트리거 상태에서 caps lock LED의 깜빡이는 속도를 조금 더 느리게 조절

: 인터페이스 자동 인식 표시와 확실한 구분을 주기 위한 패치


- fn2/fn3 led의 on/off 표시를 nl led 와 sl led에 선택할 수 있도록 수정

: 키매퍼 메뉴에서 옵션 설정


- fn2 toggle를 실행하여 fn2 레이어로 전환 해도 fn키를 누르면 이전 레이어가 계속 유지되는 버그 패치



* ps2avrGB 펌웨어도 함께 업데이트 됩니다.

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153





ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153





2014.8.14.


- bootmapper client에서 밝기 조절시 바로 적용되지 않던 버그 수정

bootmapper site 장애 안내

현재 장애가 복구 된 상태입니다.


--------------------------------------------------------------------------------------------


안녕하세요. 


현재 호스팅 업체의 서버에 문제가 생겨 bootmapper site를 이용할 수 없는 상태입니다.


대신, bootmapper client를 다운로드 해 같은 용도로 사용할 수 있습니다.


http://blog.winkeyless.kr/155


위 링크의 파일을 다운로드 해서 사용해주세요.

'기타' 카테고리의 다른 글

A.87U 택배 발송 완료  (5) 2013.09.10
기판 나왔습니다만....  (5) 2013.09.07
현재 주력  (1) 2013.09.07
하드웨어 키매핑의 편리함  (2) 2013.09.04
진행 중인 몇 가지들  (3) 2013.07.30

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153




2014.8.2.


- rainbow fading이 제대로 작동하지 않던 버그 수정




ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153



2014.8.1.


- led off시 인디케이터들은 그대로 두도록 수정

- 다수의 RGB LED를 사용시 과전류 현상을 방지하도록 수정



ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153


2014.7.27.


- RGB LED의 키 이벤트가 제대로 작동하지 않던 현상 패치



ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153


2014.7.24.


- RGB LED 변환 타입 추가

: rainbow 의 변환 타입을 추가했습니다.

1. fading : 컬러가 서서히 변환 됩니다.(기존 방식)

2. immediately : 변환 과정이 없이 컬러가 즉시 변경 됩니다.

3. sequential : LED가 하나씩 변환 됩니다.


- ps/2 led2 모드 변경 시 풀 엘이디와 함께 켜지는 경우가 있어 패치




업데이트 된 bootmapper client를 다운로드 하세요.

bootmapper client : http://blog.winkeyless.kr/155

* B 시리즈 X2 기판은 모든 RGB LED를 PCB에 직접 납땜하므로 아래와 같은 작업이 필요없습니다.



우선 RGB 바의 생김새는 아래와 같습니다.


주의 할 점이라면 방향성이 있다는 것 인데요, 사진과 같이 화살표(삼각형)으로 방향을 나타내고 있습니다.

(PCB의 컬러는 검정색과 흰색이 있습니다.)


그리고, 기판에 RGB LED 컨트롤러와 모든 RGB LED가 납땜 되어 있어야 RGB bar도 작동 합니다.





때에 따라서 뒷면에 동박이 노출 된 부분이 있는데 이런 곳은 쇼트를 방지 하기위해서 절연 테이프 등으로 적당히 처리해주셔야 합니다.



와이어링 방법은 간단합니다. 단 3 줄만 연결해주면 되는데요,


기판의 VCC를 +5V와 연결, GND를 GND와 연결, DO를 Din에 연결 해주면 됩니다.


여기서 반드시 주의 할 부분은 기판의 DO를 RGB bar의 Din과 연결해줘야 한다는 것 입니다.


아래의 기판 별로 설명해 놓은 사진을 참고하세요.



- B.mini



- B.87



- B.pad, B.87 EX, B.mini EX, B.face, B.thumb



- B.87 EX V0.2 : 와이어링 할 수 있는 별도의 홀이 마련되어 있지 않으므로 다음과 같은 위치에 와이어링 해주면 됩니다.




와이어링을 할 때 사진과 같이 와이어가 기판 바깥 쪽으로 나가지 않게 해야 하우징과 간섭이 생기지 않습니다.




B.87에 와이어링을 마친 모습입니다.

LED의 수를 bootmapper client에서 재설정 해주면 LED에 불이 켜지게 됩니다.

bootmapper client : http://blog.winkeyless.kr/154




- 참고 사진
























'정보' 카테고리의 다른 글

B-Series PCB  (0) 2015.01.08
MX-mini ps2avr V0.2 기판에 ps2avr-ext 이식하는 방법  (3) 2014.09.10
B.pad의 기본 키 맵핑  (2) 2014.07.03
RGB LED 추가 연결 방법  (0) 2014.06.27
B 시리즈 기판 납땜 가이드  (0) 2014.06.24

펌웨어 링크 : http://blog.winkeyless.kr/17


2014.7.16.


- ps2avrU for aikon에서 윈8의 절전모드 전환/복구 시 먹통 현상 패치


- FN3 toggle 기능 추가

: FN2 처럼 FN3도 레이어를 고정할 수 있는 toggle 키를 추가했습니다.



* ps2avrGB 펌웨어도 함께 업데이트 됩니다.

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153

'자료실 > 펌웨어' 카테고리의 다른 글

ps2avrGB V1.0 펌웨어 업데이트  (6) 2014.07.27
ps2avrGB V1.0 펌웨어 업데이트  (2) 2014.07.24
ps2avrGB V1.0 펌웨어 업데이트  (0) 2014.07.05
ps2avrU V1.7 펌웨어 업데이트  (13) 2014.06.30
ps2avrGB firmware  (33) 2014.06.23

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153


2014.7.5.


- RGB LED key event 추가

: 키 입력에 반응하는 2가지 이벤트를 추가했습니다.

: off, 색 지정, 보색 등 세 가지 옵션이 있습니다.

: 현재 bootmapper client에서만 설정이 가능합니다.




업데이트 된 bootmapper client를 다운로드 하세요.

bootmapper client : http://blog.winkeyless.kr/155

'자료실 > 펌웨어' 카테고리의 다른 글

ps2avrGB V1.0 펌웨어 업데이트  (2) 2014.07.24
ps2avrU V1.7 펌웨어 업데이트  (0) 2014.07.16
ps2avrU V1.7 펌웨어 업데이트  (13) 2014.06.30
ps2avrGB firmware  (33) 2014.06.23
ps2avrGB bootloader  (0) 2014.06.23

B.pad의 기본 키 맵핑




기본 레이어

- 커스텀 매크로 키 1~3, FN 키가 최상단에 맵핑 되어 있습니다.

- 녹색 표시는 2개로 분리 될 경우 해당 키의 위치를 나타냅니다.

- 붉은 색 키에는 기본적으로 맵핑 값은 없습니다.

- 파란색 키는 인디케이터 LED의 위치 표시하며 N/L은 Num Lock, C_M1은 Caps Lock LED를 표시 할 수 있습니다.

저항의 납땜 방향에 따라 해당 위치의 LED를 full LED에 종속 시킬 수 있습니다.





FN 레이어

- LED : full LED의 모드를 변경합니다.

- RGB : RGB LED의 모드를 변경합니다.

- BR+/- : full LED의 밝기를 변경합니다. (shift와 함께 누르면 RGB LED의 밝기가 변경 됩니다.)








펌웨어 링크 : http://blog.winkeyless.kr/17


2014.6.30.


- LED on/off 키 추가 

: 메모리에 저장되지 않는 on/off 상태를 전환 합니다.

: 부트매퍼를 이용해서 원하는 키에 지정할 수 있습니다.


- macro in macro

: 매크로 작동 중 다른 매크로를 실행 할 수 있습니다.

: 같은 매크로를 실행하면 무한 루프로 작동합니다.

: 무한 루프 시 매크로 키를 눌러 중지 시킵니다.

: 다른 매크로를 실행하면 현 매크로의 이후 내용은 무시합니다.




* ps2avrGB 펌웨어도 함께 업데이트 됩니다.

ps2avrGB 펌웨어 링크 : http://blog.winkeyless.kr/153


'자료실 > 펌웨어' 카테고리의 다른 글

ps2avrU V1.7 펌웨어 업데이트  (0) 2014.07.16
ps2avrGB V1.0 펌웨어 업데이트  (0) 2014.07.05
ps2avrGB firmware  (33) 2014.06.23
ps2avrGB bootloader  (0) 2014.06.23
ps2avrU V1.7 펌웨어 업데이트  (15) 2014.05.07

RGB LED 추가 연결 방법

** RGB bar를 이용해서 LED를 추가하기를 권장합니다.

- http://blog.winkeyless.kr/169


B 시리즈 기판에 사용되는 RGB LED는 사용자가 추가로 와이어링 하여 연결할 경우 다음과 같은 방식으로 작업해야 합니다.



1. VCC(빨간 선) 와  GND(파란 선)은 병렬로 연결해주면 됩니다.

- 사진은 B.87 기판입니다. 다른 기판들도 RGB LED의 끝 부분에 VCC/GND/DO 를 연결할 수 있는 홀들이 있습니다.


2. DO를 DI에 연결해줘야 합니다.

- 아래 그림과 같이 노란선으로 된 데이터 라인은 LED 끼리 직렬 연결이 되어야 합니다.

- 마지막 LED의 DO는 그냥 연결되지 않은 채로 둡니다.


3. 각 LED에는 0.1uF의 capasitor를 병렬로 연결해줍니다.


4. bootMapper Client에서 LED의 수를 맞게 다시 설정해 줍니다.

- 펌웨어 상에서는 최대 24개 까지만 인식을 합니다. 그렇기 때문에, 총 24개 이상의 LED를 연결하더라도 24개뿐이 켜지지 않습니다.

- RGB LED의 수가 많아 질수록 밝기는 어두워질 수 있습니다. 보통, 단일 컬러의 밝기는 거의 차이가 없지만 조합 컬러(2개 이상의 컬러를 이용해서 만들어내는 컬러, 대표적으로 흰색)의 밝기는 추가할수록 덜 밝습니다.












'정보' 카테고리의 다른 글

B 시리즈 기판에 RGB bar 연결하기  (0) 2014.07.23
B.pad의 기본 키 맵핑  (2) 2014.07.03
B 시리즈 기판 납땜 가이드  (0) 2014.06.24
ps2avrGB 펌웨어 정보  (0) 2014.06.23
Bootmapper Client 사용 법  (2) 2014.06.23